|
Timely execution of mega-projects
in construction Industries has led to paradigm shift with introduction
of Batching plant and its product viz; RMC.
However two basic input to RMC viz Cement and Fly ash are received at
site in Bulkers or in bags. The optimum productivity of Batching plant
depends on how fast the cement / fly ash received at kite is
transferred to Batching Silo.
Techx has designed, manufactured and supplied user friendly system
mounted on a skid, It will have options to both modes of Cement / fly
ash input i.e. Loose in Bulkers or material received in Bags.
Conveying from Bulker to Main Silo is achieved by diverting the
voluminous air flow at around 1 Kg /Cm2 Pressure. The bulker is aerated
and pressurized.
Opening of Bottom Valve allows cement / fly ash to fall directly in
dispatch pipe. The air flow carries the material to the main Silo. The
conveying rate achieved is 30 - 32 Tons I Hour for this mode, the power
consumed is 45 HP.
When cement 1 fly ash is received at site in Bags, then they are
manually taken to a hopper. Bags are slit and loose material dumped in
to the hopper. A specially, designed rotary valve ensures measured flow
of material in to the discharge pipe line. It also prevents air
entering the hopper. The cement / fly ash dropped in discharge pipe is
pushed ahead to main silo with the pressure of 1 Kg/Cm2. The transfer
rate achieved is 12 to 15 Tons / Hour for this mode. The power consumed
is 45 HP.
|
